[Project No.]
[Date] |
[Project Name]
[Project Location] |
SECTION 06400
TITLE: Architectural Millwork
RAUVISIO radiant – High Gloss PET Surface
GENERAL
SECTION INCLUDES
A. RAUVISIO radiant – High Gloss PET Surface
RELATED SECTIONS
A. Section 06410 – Custom Cabinets
B. Section 12320 – Manufactured Wood Casework
C. Section 12350 – Specialty Casework
SUBMITTALS
Submit under provisions of Section 01300
Manufacturer’s data sheets on product being used.
1. Technical Specification Guide
QUALITY ASSURANCE
A. Installer Qualifications: Cabinet/Millwork Professional
DELIVERY, STORAGE, AND HANDLING
Store products in manufacturer’s unopened packaging until ready for installation.
Store in dry, protected, well-ventilated area and protect from damage.
Store away from dust and debris.
PROJECT CONDITIONS
A. Maintain environmental conditional (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimal results. Do not install products under environmental conditions outside manufacturer’s absolute limits.
WARRANTY
A. Provide manufacturer’s warranty
PRODUCTS
MANUFACTURERS
Acceptable
Manufacturer: REHAU Industries LLC, located at: 1501 Edwards Ferry
Road NE
Leesburg, VA 20176 | Tel: (703) 777-5255 | Email:
[email protected]
| Website: www.na.rehau.com/surfaces
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in accordance with provisions of Section 01600.
RAUVISIO radiant – High Gloss PET Surface by REHAU Industries
A. Approved Product: REHAU’s RAUVISIO radiant – High Gloss PET Surface
1. RAUVISIO radiant™ High Gloss PET Surface, fabricated by approved fabricator
a. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154208 – White
b. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154210- Pearl White
c. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154213 – Grey
d. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154211 – Storm Grey
e. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154209 – Black
f. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154219- Zebrawood
g. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 154220- Ebony
h. 18.5mm (3/4”) RAUVISIO radiant high gloss PET board 15422- Grey Pine
A. Approved Product: REHAU LaserEdge™ edgebanding
1. RAUVISIO radiant™ High Gloss REHAU LaserEdge™ Edgebanding, fabricated by approved manufacturer
a. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 78997 – White
b. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 76490 – Black
c. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 3223W – Pearl White
d. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 140471 – Storm Grey
e. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 76985 – Grey
f. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 192V – Zebrawood
g. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 491W – Ebony
h. 15/16” x 1.2mm REHAU LaserEdge Mirror Gloss 3200W – Grey Pine
PART 3 EXECUTION
EXAMINATION
A. Do not begin installation until all products are properly prepared and hardware installed.
3.2 INSTALLATION
A. Install in accordance to manufacturer’s instructions using screw on European concealed hinges.
3.3 PROTECTION
Protect installed product until completion of project.
Remove peel coat after installation of product.
END OF SECTION
[Author]
[File Name] |
[Architectural Millwork]
[06400]
– [ |
P OST PROJECT REVIEW MEETING PROJECT ID [PROJECT ID]
P ROGRESS RAG REPORT PROJECT ID [PROJECT ID]
REED COLLEGE CONSENT TO PARTICIPATE IN RESEARCH [PROJECT DESCRIPTOR
Tags: [project no.], name] [project, [project, location], [date], section, name], 06400