EHR Client Installation and Setup
Below is a list of all the files you should receive when Pharmacy 5/7 is installed. The files will be located in your Pub or Export folder. Once the kids files and executable files are installed you can delete this folder and contents.
Step1:
On your Windows Server, create a shared folder called EHR. Set the permissions to read-only for Domain Users.
Extract the contents of the ehr_010client.zip file into the EHR folder.
Once you have extracted the ehr_010client.zip this is what it should look like
Step 2:
In the Bin Folder:
Edit and save Vcbroker.ini file changing the Servers section to your RPMS IP address, port, and namespace
S
Example
of Ft Yuma’s Vcbroker.ini file
------------------------------------------------------ ;
Installation Notes: ; Replace
<ip address>, <port>, and <uci> with the IP
address of your RPMS ; system,
the port number of the primary broker listener process, and the ; uci
of the target system, respectively. Optionally, you may replace the ; server
name (RPMS) with a more descriptive term, and add additional server ; entries
if required. [Servers] RPMS=161.223.205.1:9200:FYH
Change this to your server, port #, UCI [Settings] Graphic=vcBroker.jpg GraphicSettings=1 Caption=IHS-EHR
Logon DefaultServer=RPMS ---------------------------------------------------------------
Copy the Vcbroker.ini file from the bin folder to the UTL Folder (you will be prompted to replace the existing one- answer YES).
Step 4:
In the bin folder
Edit Vuecentric.ini file changing the SourcePath and DefaultPath entry to the path where the application repository is located.
TIP: you can find your Domain name using mailman
Example
of how to find your domain name Select
IHS Kernel Option: MAILMAN Menu
VA
MailMan 8.0 service for ADAM.ADAM@WINTERHAVN-HO.OHX.IHS.GOV You
last used MailMan: 06/04/07@14:52 You
have 298 new messages. The
RPMS Domain name can also be found in the ^XMB(“NETNAME”)
global node.
EXAMPLE:
Ft.Yuma’s Vuecentric.ini file
[settings] ;
Installation notes: ; Replace
<ip address> below with the IP address of your server where
source ; files
are kept. Replace <domain name> below with the domain name of
your ;
RPMS system. ;
================================================================================ ;
This is the directory path to where the master file copies are kept.
SourcePath=\\161.223.212.104\EHR\bin
Change to your site info ;
This sets the default path that is used if an explicit path is not
given. DefaultPath=%ProgramFiles%\VueCentric\
WINTERHAVN-HO.OHX.IHS.GOV\
Change
to your Domain name
Step 5:
Install the Kids patches that you are missing. You don’t need to install PXRM (Reminders patches) right now, since the taxonomies need to be populated first.
These are the kids patches that you need- check first and see which ones you need. The notes file with instructions are in the EHR folder.
beho0110.013001k
beho0110.014001k
gmrc0300.1001k
or__300.1001k
pxrm0150.1002k
pxrm0150.1003k
pxrm0150.1004k
Step 6:
Install these executable files. The note files with instructions are in the EHR folder.
beho0110.014001.exe – Install 014001 first.
beho0110.013001.exe
ehr_0100.02.exe
ehr_0100.03.exe
ehr_0100.04.exe
ehr_0100.05.exe
ehr_0100.06.exe
Step 7: Installing the BGO components
Unzip the bgo_0110.zip file. Read the installation notes. You do not need to install the KIDS build for v1.1 or v1.1 patch 1 as they were installed during the Pharmacy v7 installation. Follow the directions for the client side installation found in section 3.2 of the v 1.1 Installation Guide for EHR GUI Objects.
Follow the directions listed in section 4b of the Installation Notes for v1.1 patch 1 of the EHR GUI Objects package
Step 8: Setting up the vcUpdater Service
Once you have completed all steps 1 through 7, read and follow the instructions defined in the vcUpdaterService_Deployment.pdf included in the utl folder. It is extremely important that each step occur in the order listed in that document.
Step 9:
EHR files that should be reviewed or setup before implementing the EHR shortcut
Assign yourself the CIAV SITE MANAGER Security key and then edit the
CIAV Site Parameters file:
Select OPTION NAME: CIAV SITE PARAMETERS VueCentric Site Parameter Edit
VueCentric Site Parameter Edit
VueCentric Site Parameters for Package: VUECENTRIC FRAMEWORK
------------------------------------------------------------------------------
Default object source path
Default installation path c:\Program Files\VueCentric\WI
NTERHAVN-HO.OHX.IHS.GOV\
Default login template %DEFAULT
Host polling interval
Maximum number of resource devices
Number of resource slots to allocate
Primary inactivity timeout 300
Secondary inactivity timeout 300
Interval to display countdown timer 20
Disable CCOW support YES
Recall last selected patient
------------------------------------------------------------------------------
--- Setting Default object source path for Package: VUECENTRIC FRAMEWORK ---
Object Source Path: \\161.223.205.1\EHR\LIB\
This value should reflect the UNC path name to the lib folder for the appropriate system. For the example given in step 1, the path following the Windows Server IP address would be \ehr\live\lib.
Object Source Path: \\<ip address>\ehr\lib\
---- Setting Default installation path for Package: VUECENTRIC FRAMEWORK ----
Installation Path: c:\Program Files\VueCentric\WINTERHAVN-HO.OHX.IHS.GOV\
This value is set during the Pharmacy v7 installation and would only need to be changed if the database is copied from production to create a training system.
CIA Listener file:
Select CIA LISTENER NAME: VUECENTRIC
NAME: VUECENTRIC//
PORT: 9200//
UCI: FYH// (your UCI)
DISABLE:
The CIA LISTENER file entry is created during the Pharmacy v7 installation. The port, and possibly the UCI, would need to be changed if the production database is copied to a training system on the same Cache server. Otherwise, post installation changes are not required.
Check Task Manager and make sure that the CIANB STARTALL job is scheduled for Startup
Select OPTION NAME: CIANB STARTALL
Edit Option Schedule
Option Name: CIANB STARTALL
Menu Text: Start all registered listeners. TASK ID:
________________________________________________________________
QUEUED TO RUN AT WHAT TIME:
DEVICE FOR QUEUED JOB OUTPUT:
QUEUED TO RUN ON VOLUME SET:
RESCHEDULING FREQUENCY:
TASK PARAMETERS:
SPECIAL QUEUEING: STARTUP
Step 10:- Installing client on pc
After following the instructions in Step 8, have the user double-click on the EHR desktop Icon to install and run the client application.
( PAPEL CON MEMBRETE DEL CLIENTE ) MERCANCIAS EN
(CARTA INTESTATA DELLO STUDIO) GENTILE CLIENTE IL GIORNO 6
(DATOS A SER LLENADOS POR ULMX) NO DE CLIENTE
Tags: below is, name> below, below, client, installation, setup