CISCO EGW 2200 INSTALLATION WORKSHEET USE THE TABLE

 DATE  FEDERAL RESERVE BANK OF SAN FRANCISCO
3 DON FRANCISCO JAVIER MATO PET SECRETARIO
4 DON FRANCISCO JAVIER MATO PET SECRETARIO

5 DON FRANCISCO JAVIER MATO PET SECRETARIO
6 DON FRANCISCO JAVIER MATO PET SECRETARIO
COMPANHIA HIDRO ELÉTRICA DO SÃO FRANCISCO COORDENADORIA ESPECIAL

EGW Administration

Cisco EGW 2200 Installation Worksheet



Use the table below to record information you will need during Cisco EGW 2200 installation. For field descriptions and detailed installation steps, refer to Installing Cisco EGW 2200.

Caution: A few fields cannot be changed after installation without reinstalling the software, so be sure to enter the values you want. Among the fields that cannot be changed are Administrator ID and Password, which you will need to log on to the two administration GUIs, Cisco EGW Administration and Cisco IPT Platform Administration. The last column in the table shows whether a field can be changed after installation and if so, where you can change it.

Fault-tolerant configurations: If you are deploying Cisco EGW as a fault-tolerant pair, gather information for both systems. The information is identical except for the IP addresses.


Field/Property

Your Information

Can Be Changed After Installation?

DHCP

Not supported – Enter no

Yes, but since only “no” is valid in this version this is not relevant.

Host Name


No

IP Address


Platform Administration > Settings > IP Settings page or CLI set ip

IP Mask


Platform Administration > Settings > IP Settings page or CLI set ip

Gateway Address


Platform Administration > Settings > IP Settings page or CLI set ip

DNS Enable


No

DNS Primary


No

DNS Secondary


No

Time Zone


No

Locale


No

Domain


No

Administrator ID


No

Password


Password can be changed in CLI: set password admin

SMTP Location


No

IP Address 1 (second IP address)


Platform Administration > Settings > IP Settings page or CLI set ip

IP Mask 1 (second IP mask)


Platform Administration > Settings > IP Settings page or CLI set ip

SIP Virtual IP Address 1


No

SIP Virtual IP Address 2


No

NTP Client Enable


No

NTP Server IP Address


No


1



00 ALBA ROCA SIMBIOSIS 01 FRANCISCO JESUS GUERRA UNO
1 FRANCISCO MONTEIRO MESQUITA MORADOR DE RUA NÃO TRABALHA
12 PROBLEMAS MATEMÁTICOS PARA PRIMERO 1 FRANCISCO SANTIAGO Y


Tags: cisco egw, deploying cisco, cisco, installation, table, worksheet