MSTC3 range of Solenoid Controllers: Specification
Controller
No. channels (depends on model) |
2,4,8,10 |
|||
Individual channel test button |
|
|||
Individual channel active indicator |
Green status LED |
|||
Individual channel overheat indicator |
Red status LED |
|||
Data Input connector |
DB25 Female |
|||
Data Input signals |
TTL, normal logic |
|||
Data Input, pin compatible with LPT port |
|
|||
Pulse width |
Uncommitted, copy of input trigger |
|||
Aux Output connector (where fitted) |
DB9 Female |
|||
Aux Output signals (where available) |
TTL, normal logic |
|||
Individual manual output level control |
0-100% max, calibrated scale |
|||
External common control of output level |
Available if requested |
|||
External common level for max output |
10 Volts |
|||
External drive connector (where fitted) |
BNC socket |
|||
Internal/external drive selection |
Available if requested |
|||
Main Output Connectors |
Miniature 4 pole |
|||
Main Output voltage max |
18V nominal |
|||
Load resistance |
38 nominal |
|||
Visual general indication of overheat |
Red LED |
|||
Audible indication of overheating |
|
|||
Mute of audible overheat condition |
|
|||
Swap channels |
Only available on 2-channel models |
|||
Gate to block all outputs |
|
|||
Gate enabled indicator |
Green LED |
|||
Controller ‘connected’ signal available on data port |
|
|||
Controller ‘on’ signal available on data port |
|
|||
Channels ‘swapped’ signal available on data port |
|
|||
‘Overheat’ signal available on data port |
|
|||
Pair stack option to allow 2 x 8-channel units |
Available on request |
|||
Battery status indicator |
10 segment colour coded bar display monitors battery voltage |
|||
Power requirements |
24V DC from external battery pack |
|||
Power input connector |
Large 4-pin plug |
|||
|
2-ch |
4-ch |
8-ch |
10-ch |
Dimensions (WDH) |
|
|
250 x 250 x 143 |
367 x 250 x 143 |
Weight |
|
|
|
|
External re-chargeable battery pack
Output voltage |
24V |
Charge capacity |
2.3AH |
Internal fuse |
6A, automatically resettable |
Thermal protection |
Internal temp limited to 84oC, one shot |
Power connector |
Large 4-pole socket |
Dimensions (WDH) |
205 x 140 x 75 |
Weight |
~2. kg |
DC power cable
Controller connector |
Large 4-pole socket |
Power pack connector |
Large 4-pole plug |
Length |
0.5m |
Charger
Output voltage |
12V |
Charging capacity max |
3.75AH |
Charging current max |
750mA |
State of charge indication |
|
Power connector |
Large 4-pole plug on lead |
Input (mains) |
190-264V VAC |
Mains connector |
Built-in, UK or continental style |
Dimensions (L x W x H) |
100 x 51 x 63 excluding pins |
Weight |
250g |
Controller kit contents
Controller |
1 |
Battery pack |
2 |
Power cable |
1 |
Charger (UK or European) |
1 |
Data cable (2m) |
1 |
User guide |
1 |
Optional accessories
Data cable 3m |
DC-3 |
Data cable 5m |
DC-5 |
Data cable 10m |
DC-10 |
M & E Solve
04 March 2007
Tags: channels (depends, channels, range, specification, solenoid, controller, controllers, mstc3, channels