The Z_file is an ASCII file containing the results of impedance calculations performed on the X and Y files bearing the same root file name and extension. The results are ordered by frequency and the values for each frequency occupy 2 lines with a total of 15 values per frequency. Each value is 11 characters long. An example of the format of data for a single frequency is:
11.2 |
0.5841 |
257 |
25.7 |
0.5052 |
168 |
43.5 |
|
153.379 |
34.161 |
11.034 |
-215.523 |
10.252 |
-129.447 |
-164.482 |
-86.834 |
The impedance variables are listed by column number in the table below.
Column |
Line 1 |
Line 2 |
1 |
frequency in Hz |
re Zxx |
2 |
ExHy coherency |
im Zxx |
3 |
ExHy scalar apparent resistivity |
re Zxy |
4 |
ExHy scalar phase |
im Zxy |
5 |
EyHz coherency |
re Zyx |
6 |
EyHx scalar apparent resistivity |
im Zyx |
7 |
EyHx scalar phase |
re Zyy |
8 |
<blank> |
im Zyy |
EIS – INTRODUCTION AND BASIC CONCEPTS IMPEDANCE DEFINITION CONCEPT
FABRICATING IMPEDANCE TRANSFORMERS FOR RECEIVING ANTENNAS JOHN BRYANT MAY
IMPEDANCE FILE FORMAT THE ZFILE IS AN ASCII
Tags: ascii file, impedance, zfile, ascii, format