DORMA SPECIFICATION SERVICES PROJECT MANUFACTURER DORMA UK LTD

BOARD POLICY SECTION OPERATIONS SUBJECT DORMANT ACCOUNT POLICY APPROVED
C OMERCIAL 678 753 272 EMAIL SALVADORMASGESTIONCANARIASCOM OFICINA 622
COUPE TRAVERSE BASSE DORMANT DESCRIPTIF AMBIAL PW PORTE REPLIABLE

DORMA SPECIFICATION SERVICES PROJECT MANUFACTURER DORMA UK LTD
DORMANT SITES PRIORITY SITE REQUEST FORM ALL SUBMISSIONS TO
DORMANT SPRAY APPLICATIONS LEONARD CICERELLO UCCE MASTER GARDENER I

ED200

DORMA SPECIFICATION SERVICES PROJECT MANUFACTURER DORMA UK LTD

DORMA SPECIFICATION SERVICES

Project

Manufacturer DORMA UK LTD.

WILBURY WAY, HITCHIN, SG4 0AB.

Tel: +44 (0)1462 477 600,

Email: [email protected]

Web: www.dorma.com

Manufacturer’s reference: DORMA HSW EASY Safe sliding stacking glazed partition system

Quantity required:

Panels

Manual top hung sliding glass partition system consisting of running track, stacking area and optional panel configuration

Configuration

No. ? Single / double action door panels
No. ? Single / double action sliding door panels
No. ? Basic sliding panels
No. ? Fixed panels
No. ? Track & options for Stacking Area
No. ? Carrier Profile

System produced to ISO 9001
System certified to:
- Wind load (Frame bending): EN 12210
- (Endurance strength): DIN EN 1527 and DIN EN 1191 Class 3
- Side impact: DIN EN 13049 Class 5 (highest class)
- Corrosion: DIN EN 1670 Class 4
- EPD Environmental Product Declaration: ISO 14040

For use with 10-19mm Toughened safety glass or Laminated Safety Glass (LSG possible using Clamp & Glue Technology)

Max. panel width: 1,250mm

Max. panel height: 4000mm for Sliding & End Panels, 3600mm for Single/Double Action Sliding Panels
Max. panel weight: 150kg (for sliding and end panels) 120kg (for single/double action sliding panels)

Extruded aluminium profile running track

Extruded aluminium top and bottom rails clamped to toughened glass panels comprising of base rails, clip on decorative covers and end caps.

Panels secured in closed position by either hand or foot operated shoot bolts or cylinder locking into floor mounted keeps.

3 in 1 Multilock with three locking options: front, side or cylinder locking.

Locking status device on the Door panel.

Single action fixed end panel controlled by floor pivot and TS92 or TS73 door closer. Double action panel with floor pivot or BTS floorspring.

Single or double action sliding panels controlled by TS 92 or ITS 96 door closer.

Sliding stacking panels hung from purpose made roller assemblies consisting of composite multi-directional rollers with non-corrosive engineered carriers

Top panel profile includes double brush seals as standard. Double brush seals optional for the bottom door rails.

Optional vertical double brush seals can be fitted up to the full height of the door and give additional draft proofing

Aluminium Profile Finish: (Option)

Aluminium mill finish (100)
Aluminium Silver (109)
Aluminium Silver EV1 (150)
Aluminium similar satin stainless steel (157)
Stainless steel (C31)
Special anodised (199)
Polyester Powder-coated

System prepared for bolting under an aligned substructure by others, extending over the full system layout (including stacking area); overhead track prepared with guide slots for insertion of M17 hex head bolts.

Installation carried out by the manufacturer’s approved engineers

INFORMACIÓN AL CONSUMIDORMANCOMUNIDAD AGUAS Y SERVICIOS COMARCA DE LLERENA
LUCIANO PAVAROTTI NESSUN DORMA CONTENUTI LESSICO E SINONIMI
MIENTRAS DORMÍAIS ESTA PEQUEÑA HISTORIA OCURRIÓ EN EL

Tags: dorma specification, reference: dorma, dorma, services, manufacturer, specification, project