TEST REPORT NO DJ20161017 DATE OCT 17 2016 PAGE

ANNUAL REPORT ON DATA COLLECTIONS 2007 1 INTRODUCTION
WORKER’S AND PHYSICIAN’S REPORT FOR WORKERS’ COMPENSATION CLAIM
EMA520992013 EMAPDCO SUMMARY REPORT ON AN APPLICATION FOR A

RESEARCH REPORT CORRECTIONAL OFFICER RECRUITS AND THE
91910 4H INVOLVEMENT REPORT NAME
BANNER FINANCE AND REPORTING GUIDE FOR DEPARTMENTAL

Test Report No. DJ20161017 Date: OCT. 17, 2016 Page 4 of 4

ZHEJIANG DEJIA NEW MATERIAL CO., Ltd.

Tell: +86-573-87799855 87799051 Fax:+ 86-573-87799811

E-mail: [email protected]

#1, Luhong Road, Qianjiang Industrial Zone, Dingqiao Town, Haining City,314413, Zhejiang province, China

The following samples were submitted and identified on behalf of the client as:

Sample Description: White PVC Coated Fabric

Dejia Technology Center Ref No.: 20161017

Test Requested:

To determine the flammability (building materials class B2) in accordance with DIN 4102-1 (May 1998) Fire behaviour of building materials and elements Part 1: Classification of building materials, Requirements and testing

Test Results: --See attached sheet—

Conclusion:

The tested sample MEETS the flammability requirements of Class B2 of building materials under DIN 4102-1 (May 1998).

Test Period:

Sample Receiving Date : SEP. 25, 2016

Test Performing Date : SEP. 25, 2016 to OCT. 17, 2016

Signed for and on behalf of

Dejia-Technology Center:

TEST REPORT NO DJ20161017 DATE OCT 17 2016 PAGE

Matt Meng

Engineer

I. Test conducted

This test was conducted as DIN 4102-1: 1998 Clause 6.2-Class B2 materials.

II. Sample details

General description	White PVC Coated Fabric
Color	White
Size of sample	1000 mm X 190 mm & 190 mm X 90 mm
Mass per unit area	About 900g/m²

Conditioning

Prior to testing , the sample was conditioned at least 14 days to constant mass at a temperature of 23 ± 2^oC

III. Test results

Normal Flammability Test according to DIN 4102-1 Clause 6.2

Flame application: bottom edge ignition & surface ignition

Normal Flammability Test according to DIN 4102-1 Clause 6.2

Flame application: [ √ ] bottom edge ignition, [ √ ] surface ignition

Bottom edge ignition
Specimen No.	1	2	3	4	5
Reaching the measuring mark within 20 seconds	No	No	No	No	No
Self extinguishing of the flame (s)	0.97	1.02	0.85	0	0.34
End of afterflaming (s)	0.97	1.02	0.85	0	0.34
End of afterglowing (s)	0.97	1.02	0.85	0	0.34
Molten dripping	No	No	No	No	No
Smoke developments (visual impression)	Slight
Surface ignition
Reaching the measuring mark within 20 seconds	No	No	No	No	No
Self extinguishing of the flame (s)	1.09	0.94	0	0.49	0.87
End of afterflaming (s)	1.09	0.94	0	0.49	0.87
End of afterglowing (s)	1.09	0.94	0	0.49	0.87
Molten dripping	No	No	No	No	No
Smoke developments (visual impression)	Slight

All timings are from the removing of ignition flame.

V. Criteria for classification for Class B2 (DIN 4102-1 Clause 6.2.2)

All materials expect flooring materials may be classed as B2 materials if they pass the ignitibility test, which shall be deemed passed if, for any of the five specimens tested, flaming does not reach the gauge mark within 20 seconds after flame application, either with bottom edge ignition or surface ignition.

TEST REPORT NO DJ20161017 DATE OCT 17 2016 PAGE

***The end of this report***

The content of this PDF file is accordance with the original issued reports. This Test Report cannot be reproduced, except in full, without prior written permission of the Company.

2005FTARTAWKSP016 ECONOMY REPORT CHILE SUBMITTED BY MS KAREEN
8 PREPARING STATISTICAL REPORTS ON PSYCHOTROPIC SUBSTANCES
ACC 4152 IMPAIRMENT ASSESSMENT (ACCREDITED EMPLOYER) REPORT PLEASE

Tags: dj20161017 date:, report, dj20161017