PRODUCT RELEASE NOTES FOR HPUX 11I UPDATE FOR B2000B2600C8000

This document is the release notes for Avaya Proactive Contact HP-UX 11i Update for B2000/B2600/C8000. This document details the necessary steps to update an existing HP-UX 11i installation on a B2000/B2600/C8000.

1.Pre-requisite

1.1.Software Dependencies

This procedure assumes that HP-UX 11i, as delivered on the 12679-01 CD archive and HP-UX 11i Updates as delivered on 12714-01 CD and HPUX11i updates as delivered on 12714-02 CD, are already installed and functioning. The software referenced in this document is for update purposes only. For this software the Material ID and CD label is as follows:

HP-UX 11i Update for B2000/B2600/C8000

Material ID: 700459290

1.2.Obtaining files and patches

There are two ways to obtain this release. They are:

Ordering the installation CD labeled HP-UX 11i Update for B2000/B2600/C8000, Material ID: 700459290.
Downloading the ISO file from Avaya Support Web site and writing it on a CD.
To download the ISO file:

Go to Avaya support site at http://support.avaya.com
Navigate to Resource Library > Downloads > Proactive Contact -> 3.0.x.
Download the HP-UX 11i Update for B2000/B2600/C8000 ISO image.

To write the ISO on a CD:

Insert a blank writable CD in the CD / DVD RW drive.

NOTE: You can use any available CD writing tool like Roxio or
Nero to write the ISO file on a CD.
Select the Image burning option from the CD writing software.

For Roxio select Copy > Burn Image option.
For Nero Express select Image, Project, and Copy > Disc Image or Saved Project option.

Browse and select the ISO image for burning.
Wait until the CD burning is completed.
Label the CD as HP-UX 11i Update for B2000/B2600/C8000, Material ID: 700459290.

2.Installation

This section describes how to install this release.

2.1.List of Patches provided by Third Party

This section provides a list of patches provided by HP.

Workitem	OS Patch	Description
wi00283191	PHSS_38183	HPSBUX02393 SSRT080057 rev.1 - HP-UX Running DCE, Remote Denial of Service (DoS)
wi00124066	PHNE_37110	HP-UX Running rpcbind, Remote Denial of Service (DoS)
wi00113914	PHCO_36562	HP-UX Running System Administration Manager (SAM), Unintended Remote Access
wi00242546	PHCO_39172	Updated tztab

2.2.Pre-installation Procedure

The system should be in a “quiet” state, that is, the application should be shutdown and users logged off. Run the following commands to stop the PDS, Mid-Tier, and Database:
stop_pds
stop_mts
stop_db

Ensure the following:

A backup of the existing system may be required by other procedures and/or the customer. Generally, bootable backups, e.g. /opt/moimager are always a good idea before installing update bundles.
Depending on the extent of previous patching activity, it could be that an excessive amount of disk space is taken up by superseded patches. To remove all superseded patches and thereby free up disk space, you may run the following command:
cleanup –c 1
After a quick analysis phase and a listing of the superseded patches, you will be asked if you would like to commit the patches. Type “y” and press Enter and the superseded patches will be removed.

2.3.Installation Procedure

This procedure will install all the HP-UX 11i updates for B2000/B2600/C8000.

Login to the dialer as root.
Run the who command and check that non root user is not logged into the dialer. If any non root user was listed in the command then logout all those users before proceeding for the installation.
Insert the installation CD in the CD/DVD ROM drive.
Mount the CD using the following command:
mount –F cdfs –o rr /dev/dsk/<Drivename> /CDROM

NOTE: If you do not know which block device file is associated with your CD/DVD drive, execute “ioscan –fnd sdisk” command to find the device. Insert the proper name wherever you see <Drivename> in this procedure.
At the Unix prompt, run the following command:
swinstall
The Specify Source dialog box will appear and the Source Depot Type field will be highlighted with entry Network Directory / CDROM.
TAB to Find Local CD and press Enter.
The swinstall will search details of CDROM and update the following:
Source Host Name as <Host Name>
Source Depot Path as “/CDROM”
TAB to OK and press Enter.
The SD Install – Software Selection dialog box will be displayed, as well as the software products found on the CD media. Focus is on “BUNDLE11i_303”, press space bar and press TAB.
Using the arrow keys, position the cursor on Actions and press Enter.
Select Mark for Install option and press Enter.
Press TAB and use the right arrow key to position on Actions and press Enter.
Select Install and press Enter.
The installer will analyze the dialer and will display status as Ready and that 9 of 11 products are scheduled for installation (it is possible that fewer products will be scheduled for installation if your system has undergone selective patching).
Tab to OK and press Enter.
Message is displayed stating machine will reboot after install. Tab to Yes and press Enter to confirm reboot to select install.
When the installation is finished, the status will be Ready.
Tab to Done and press Enter.
Message is displayed stating machine will be rebooted when OK is pressed. Tab to OK and press Enter to restart the dialer.
After rebooting the dialer, login to the dialer as root.

2.4.Post-Installation Procedure

This procedure will verify the installation of HP-UX 11i updates for

B2000/B2600/C8000. Run the following command:

swlist –l bundle|grep BUNDLE11i_303

You should see the following output:

BUNDLE11i_303 B.11.11.0309.1 (Required Patch Bundle for HP-UX 11i)

Verify the contents of bundle “BUNDLE11i_303” using following command:

swlist -v -l bundle BUNDLE11i_303

The above command should display following HP-UX OS patch:

PHSS_38183
PHNE_37110
PHCO_36562
PHCO_39172
PHCO_31923
PHCO_33205
PHCO_35732
PHCO_35743
PHKL_30398
PHKL_34805
PHKL_34926

As the state of all software should be “configured”, there should be zero output from the following command:

swlist -l fileset -a state | grep installed

Special Installation Instructions for DST Patch PHCO_39172:

This patch installs the new tztab file to /usr/newconfig/usr/lib/tztab and updates /usr/lib/tztab only if it matches a version delivered by the OS or an earlier patch.

The tztab contains all the timezone related information.

If the file /usr/lib/tztab has been customized, /usr/lib/tztab and /usr/newconfig/usr/lib/tztab needs to be merged and such a merged file is installed manually using a specific method, to avoid problems with processes accessing the current copy of /usr/lib/tztab.

Note: All the processes which require the new information need to be restarted after the new /usr/lib/tztab file is installed.

To merge the changes or replace the tztab file with the newly delivered file follow these steps (the following assumes that the /usr/lib/tztab.new and /usr/lib/tztab.old can be replaced):

Type cd /usr/lib and press Enter.
Type cp -p tztab tztab.old and press Enter.
Type cp -p /usr/newconfig/usr/lib/tztab /usr/lib and press Enter.

3.Enhancements

None

4.Fixes

None

5.Troubleshooting

None

6.Known Issues

None

7.Contact Support

Customers can contact Avaya Proactive Contact Technical Support through Internet, email, or telephone. For details visit:

http://support.avaya.com/japple/css/japple?PAGE=OpenPage&temp.template.name=Support_Countries

Page 8

APPLICATION TO THE REGISTRAR TO REQUEST THE PRODUCTION
BARRIERS TO EFFECTIVE CLIMATE CHANGE ADAPTATION PRODUCTIVITY COMMISSION
CERTIFICATION AND LABELLING OF SOLAR THERMAL PRODUCTS

Tags: notes, update, b2000b2600c8000, release, product

PRODUCT RELEASE NOTES FOR HPUX 11I UPDATE FOR B2000B2600C8000