Receive flattened box(es).
Open box out with print area down.
Separate the folded handle flap section from the main box along the perforated edge. (You may need to use scissors or an X-acto knife for this.)
You now have one long side with a handle flap joined at each end and
one long notched side with no attachments.
Fold the long
notched side to the inside of the box, flat against the side wall.
Fold the two handle flaps to the inside of the their long side making a “handle package.”
Fold the “handle package” to the inside of the box so that it closes that end of the box. (The long notched side should still be snug up against its wall.)
Turn the box over. (The “handle package” is now on the bottom of the box.)
Pull each handle flap up to its appropriate side.
Fold the long notched side down to the bottom of the box. Voila! You have a box!
To close the box: Fold the two flaps without notches across the top. Fold the long notched sides across the top linking them at their notches.
VEHICLE DVR PRODUCT INSTRUCTIONS 48 ROAD 1080P HD
(2 PHOTOS) PERSONAL HISTORY FORM SEP INSTRUCTIONS PLEASE
(A)LINDA LINGLE GOVERNOR INSTRUCTIONS FOR GENERAL APPLICATION CATEGORY I
Tags: archival box, archival, instructions, receive, building