SERVICE SPECIFICATION SYSTEM KRISTALLINO GENERAL REQUIREMENTS THE ENTIRE SIGNPOSTING

CORPORATE SERVICES LEAD MEMBER BRIEFING 18TH NOVEMBER 2002 PRESENT
 RYERSON ABORIGINAL STUDENT SERVICES PEER SUPPORT AT RASS
DATE DIFSOCIAL SERVICES REPRESENTATIVE ADDRESS CITY STATE ZIP RE

ENTER DISTRICT NAME HERE SERVICES PLAN FOR PRIVATE SCHOOL
ERROR! NO TEXT OF SPECIFIED STYLE IN DOCUMENT SERVICE
[PRODUCTS AND SERVICES PROCUREMENT TEMPLATES ASSIGNMENT OF CONTRACT

Ausschreibungshilfe System Kristallino

Service specification System KRISTALLINO


General requirements

The entire signposting must show a uniform appearance. All signs must be long-time buyable, so that the original appearance is guaranteed by extension. Architects should prefer the following sign design description. Alternative offers with different system solutions are admitted, if there is participation at the main offer, at the same time All measurements in this service specification are width x height. All elements of the KRISTALLINO Signs have a 10-year availability guarantee.


Single-pane safety glasses are normally used for KRISTALLINO signs. The silver anodised glass retainers can be inserted as wished. As for example at the top and bottom, lateral at the top and bottom and so on. The glass retainers are 24 x 24 mm. The glass panel has a 16 mm wall clearance. The glass retainers are closed lateral with silver plastic caps. Text change takes place by loosen two grub screws at the rear of the glass retainer. It is put on the mounting rail and fixated with grub screws after the text change.



Single-pane safety door sign in sandwich construction

Single-pane safety door signs consisting of 2 x 3 mm single pane safety glass with all-round bevelled and polished edges. The glasses are held together with a silver anodised aluminium glass retainer 24 x 24 mm with non-visible grub screws. The glass retainers are mounted on a raw-aluminium mounting rail and fixated with two or more grub screws. The mounting rail is mounted with non-visible flat-head torx screws and all-purpose dowels on concrete, masonry, plasterboard or lightweight construction walls. Silver plastic caps are inserted lateral at the mounting rails.


… Piece DOOR SIGNS 149 x 149 mm

Glass size 149 x 149 mm

Length of anodised glass retainer: 105 mm 1 Piece (bottom)


…Piece TEXT FEEDER laser print 4c on satin finished paper

Size 148,5 x 148,5 mm



Single-pane safety info signs in sandwich construction

Single-pane safety door signs consisting of 2 x 3 mm single pane safety glass with all-round bevelled and polished edges. The glasses are held together with a silver anodised aluminium glass retainer 24 x 24 mm with non-visible grub screws. The glass retainers are mounted on a raw-aluminium mounting rail and fixated with two or more grub screws. The mounting rail is mounted with non-visible flat-head torx screws and all-purpose dowels on concrete, masonry, plasterboard or lightweight construction walls. Silver plastic caps are inserted lateral at the mounting rails.



…Piece DOOR SIGNS 420 x 297 mm

Glass size 420 x 297 mm

Length anodised glass retainer 297 mm 2 pieces (top and bottom)


…Piece TEXT FEEDER Laser print 4c on satin finished paper

Size 420 x 297 mm



Single-pane safety hanging signs direct labelling with film text

Single-pane safety hanging signs with 6 mm glass panels, with satin-finished-film background and film inscription. The panels are held in place by two silver anodised glass retainers 15 x 22 mm, which are mounted with 2 stainless steel cables to the ceiling.


…Piece DOOR SIGN 840 x 210 mm

Glass size 840 x 210 mm

Length of anodised glass retainer 594 mm 1 piece (top)


…Piece DIRECT LABELLING with film letters; character height. approx. ….mm

…Piece Film text line

Text length until ….cm



Single-pane safety hanging sign in sandwich construction for self-labelling

Single-pane safety hanging signs with 2 x 3 mm single-pane safety glasses, with satin finished film feeder. The glasses are held in place by one (or two – by vertical design) silver anodised glass retainer 15 x 22 mm, which is mounted with two stainless steel cables to the ceiling.


…Piece DOOR SIGN 594 x 149 mm

Glass size 594 x 149 mm

Length of anodised glass retainer 420 mm 1 piece (top)


…Piece TEXT FEEDER Laser print 4c on satin finished paper

Size 594 x 148,5 mm



Table displays

Table displays consisting of 2 x 4 mm single-pane safety glasses with the possibility to insert a text feeder.

Silver anodised glass retainer with a length of 149 mm; mounting rail with two lateral, silver cover caps; screw mounting.


…Piece TABLE DISPLAY 170 x 105 mm

Glass size 170 x 105 mm

Length of anodised glass retainer: 105 mm 1 piece (bottom)


…Piece TEXT FEEDER Laser print 4c on satin finished paper

Size 170 x 105 mm



Info steles for direct labelling

Info stele consisting of 8 mm single-pane safety glass or direct labelling with film text, glass size 430 x 1800 mm. Glass retainer and 10 mm steel floor plate are silver powder coated.


… Piece INFO STELE 430 x 1800 mm

Glass size 430 x 1800 mm

Length glass retainer 430 mm 2 pieces

10 mm steel floor plates 435 x 350 mm


…Piece DIRECT INSCRIPTION with film letters; character height approx.….mm

…Piece Film text line

Text length until ….cm



Direction sign in sandwich construction for self-labelling

Single-pane safety door signs consisting of 2 x 3 mm single pane safety glass with all-round bevelled and polished edges. The glasses are held together with a silver anodised aluminium glass retainer 24 x 24 mm with non-visible grub screws. The glass retainers are mounted on a raw-aluminium mounting rail and fixated with two or more grub screws. The mounting rail is mounted with non-visible flat-head torx screws and all-purpose dowels on concrete, masonry, plasterboard or lightweight construction walls. Silver plastic caps are inserted lateral at the mounting rails.



…Piece DIRECTION SIGN 420 x 149 mm

Glass size 420 x 149 mm

Length of anodised glass retainer 210 mm 1 piece (bottom)


…Piece TEXT FEEDER laser print 4c on satin finished paper

Size 420 x 148,5 mm



Flag sign

Single-pane safety flag sign with 2 x 3 mm single-pane safety panel, to insert a satin-finished film. The panels are held in place by a silver anodised glass retainer rail 15 x 22 mm, which is fixed with two screws.


…Piece FLAG SIGNS 149 x 149 mm

Glass size 149 x 149 mm

Length of anodised glass retainer 105 mm 1 piece (lateral)


…Piece TEXT FEEDER laser print 4c on satin finished paper

Size 148,5 x 148,5 mm



Changing-signs in sandwich construction for self-labelling

Single-pane safety door signs consisting of 2 x 3 mm single pane safety glass with all-round bevelled and polished edges. The glasses are held together with a silver anodised aluminium glass retainer 24 x 24 mm with non-visible grub screws. The glass retainers are mounted on a raw-aluminium mounting rail and fixated with two or more grub screws. The mounting rail is mounted with non-visible flat-head torx screws and all-purpose dowels on concrete, masonry, plasterboard or lightweight construction walls. Silver plastic caps are inserted lateral at the mounting rails. The glass retainers are severed by changing-signs, so that the signs which are in-between can be changed out.


…Piece CHANGING-SIGNS 3x 420 x 149 mm with 5 mm space

Glass size 3 x 420 x 149 mm

Length of anodised glass retainers 457 mm, 2 pieces (lateral)


…Piece TEXT FEEDER laser print 4c on satin finished paper

Size 420 x 148,5 mm

Seite 3 von 3


C HILDREN AND FAMILY SERVICES
POSITION LOCAL SERVICE DIRECTOR HOURS 13 HOURSWEEKS
20022003 ACADEMIC AND SUPPORT PROGRAMS SERVICES FOR


Tags: entire signposting, general, signposting, requirements, system, specification, service, kristallino, entire