1.
|
Notifying Member: Uganda
If
applicable, name of local government involved (Article 3.2 and
7.2):
|
2.
|
Agency responsible: Uganda National Bureau of Standards
Name and
address (including telephone and fax numbers, email and website
addresses, if available) of agency or authority designated to
handle comments regarding the notification shall be indicated if
different from above:
|
3.
|
Notified under Article 2.9.2 [ ], 2.10.1 [ ], 5.6.2
[X], 5.7.1 [ ], other:
|
4.
|
Products covered (HS or CCCN where applicable, otherwise
national tariff heading. ICS numbers may be provided in addition,
where applicable): Petroleum products; Petroleum oils and oils
obtained from bituminous minerals, crude. (HS 2709). Petroleum
products in general (ICS 75.080).
|
5.
|
Title, number of pages and language(s) of the notified
document: DUS 2042:2018 Standard practice for calculating
viscosity index from kinematic viscosity at 40 and 100°C,
First Edition. (14 page(s), in English)
|
6.
|
Description of content: This Draft Uganda Standard covers
the practice for the procedures for calculating the viscosity
index of petroleum products, such as lubricating oils, and related
materials from their kinematic viscosities at 40°C and 100°C.
This Draft Uganda Standard does not apply to petroleum products
with kinematic viscosities less than 2.0 mm2/s at
100°C.
|
7.
|
Objective and rationale, including the nature of urgent
problems where applicable: Prevention of deceptive practices
and consumer protection; Harmonization
|
8.
|
Relevant documents:
ASTM D341 Practice for Viscosity-Temperature Charts for
Liquid Petroleum Products
ASTM D445 Test Method for Kinematic Viscosity of Transparent
and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D1695 Terminology of Cellulose and Cellulose
Derivatives
ASTM D7042 Test Method for Dynamic Viscosity and Density of
Liquids by Stabinger Viscometer (and the Calculation of Kinematic
Viscosity)
ASTM E29 Practice for Using Significant Digits in Test Data
to Determine Conformance with Specifications
ISO 3104 Petroleum Products-Transparent and Opaque
Liquids-Determination of Kinematic Viscosity and Calculation of
Dynamic Viscosity
2.3 Energy Institute Standard:5
IP 71 Determination of
Kinematic Viscosity and Calculation of Dynamic Viscosity
|
9.
|
Proposed date of adoption: December 2018
Proposed
date of entry into force: Not applicable
|
10.
|
Final date for comments: 60 days from notification
|
11.
|
Texts available from: National enquiry point [X] or address,
telephone and fax numbers and email and website addresses, if
available, of other body:
|