C/S
Cubicle
Curtains
SECTION 10 19 00
CUBICLE CURTAINS
PART 1 – GENERAL
RELATED
DOCUMENTS
Drawings
and general provisions of the Contract, including General and
Supplementary Conditions and Division 1 Specification Sections,
apply to this Section.
SUMMARY
This
section includes the following:
Cubicle curtains
1.03 PERFORMANCE REQUIREMENTS
Curtains:
Provide curtain fabrics with the following characteristics:
Fabrics
are launderable to a temperature of not less than 160 deg F (71 deg
C).
Fabrics
are flame resistant and are identical to those that have passed NFPA
701 when tested by a testing and inspecting agency acceptable to
authorities having jurisdiction (AHJ).
SUBMITTALS
Product
Data: Submit copies of manufacturer’s detailed technical data
for materials, fabrication, and physical appearance.
Shop
Drawings: Show layout and types of cubicle curtains, sizes of
curtains, and number of carriers.
Samples
for Verification: Provide samples of the following:
Curtain
Fabric: 12-inch square swatch or larger sample as required to show
complete pattern repeat, from dye lot used for the work, with
specified treatments applied.
Mesh
Top: Not less than 4 inches square, demonstrating manufacture’s
standard hemming around mesh perimeter with matching fabric.
Cubicle
Schedule: Use same room designations as indicated on drawings
Maintenance Data: Provide fabric manufacturer’s standard maintenance procedure documentation.
PROJECT CONDITIONS
Environmental
Limitations: Do not install cubicles until spaces are enclosed and
weatherproof, wet work in spaces is complete and dry, work above
ceilings is complete, and ambient temperature and humidity
conditions are maintained at the levels indicated for Project when
occupied for its intended use.
Field Measurements: Where cubicles are indicated to fit to other construction, verify dimensions of other construction by field measurements before fabrication and indicate measurements on Shop Drawings. Coordinate fabrication schedule with construction progress to avoid delaying the work.
WARRANTY
Provide copy of manufacturer’s standard warranty.
PART 2 - PRODUCTS
2.01 MANUFACTURERS
Subject
to compliance with the requirements listed, provide cubicle curtains
from the following manufacturer:
C/S Cubicle Curtains, a Division of Construction Specialties, Inc.
3 Werner Way
Lebanon, NJ 08833
P: (908) 849-4000 / F: (908) 849-4398
www.c-sgroup.com
Alternative manufacturers will not be accepted
2.02 MATERIALS
Cubicle
Curtain:
Fabric: Provide 100% polyester curtains. Fabric is to be opaque, washable, flame retardant and closely woven.
Pattern & Color:
<**Note to specifier – please insert A. desired fabric pattern and color OR select B. desired C/S standard pattern & color and delete others>
Cubicle Curtain Fabric: Designer fabric pattern and color to be the following:
<insert
designer fabric pattern & color>
Cubicle Curtain Fabric: Select solid or patterned fabric from manufacturer’s standard selection as follows:
Pattern: RX7004 / Color: <insert color>
Pattern: Twig / Color: <insert color>
Pattern: Sugar Lash / Color: <insert color>
Pattern: Fluent / Color: <insert color>
Pattern: Flora / Color: <insert color>
Pattern: Kriya / Color: <insert color>
Pattern: Flourish / Color: <insert color>
Pattern: Increment / Color: <insert color>
Pattern: Moderate / Color: <insert color>
Pattern: Lynx / Color: <insert color>
Pattern: Orbit / Color: <insert color>
Pattern: River Birch / Color: <insert color>
Pattern: New Shadow Cube / Color: <insert color>
Pattern: Windsor / Color: <insert color>
Pattern: Connections / Color: <insert color>
Pattern: Xanadu / Color: <insert color>
Pattern: Allegro / Color: <insert color>
Pattern: Oxford / Color: <insert color>
Antimicrobial Treatment: <**Note to specifier – please delete this section if antimicrobial and/or liquid resistant treatment is not required>
Standard
antimicrobial treatment applied to the selected cubicle curtain
fabric
[OR]
Nanotex + BioAM spill & stain resistant treatment combined with an antimicrobial agent for protection of fabrics within healthcare settings.
2.04 FABRICATION
Cubicle Curtain:
Type
of C/S Curtain:
<**Note
to specifier – please select type of curtain to be used>
C/S Traditional Curtains
C/S
Snap-Lock Curtains with plastic snaps across top of fabric panels
Width:
Equal to track length from which curtain is hung plus 10 percent,
but not less than 12" (300 mm).
Length:
Equal to floor-to-ceiling height minus 2" from finished
ceiling at top and 12” or 15” above finished floor
<**Note
to specifier – please select either 12” or 15”>
Mesh
Top: Manufacturer’s standard ½” holed mesh top,
framed around perimeter with matching fabric as specified. Mesh
height to be 18”, 21”, 28”, 30” or other
<**Note
to specifier – please select mesh height”>
Top
Hem: Not less than 1" (26 mm) and not more than 1 ½"
(40 mm) wide, triple thickness, reinforced with integral web and
double stitched.
Grommets:
2 piece, rolled-edge, rustproof, nickel-plated brass and spaced
not more than 6" (150 mm) o.c.
Bottom
and Side Hems: Not less than 1" (25 mm) wide, reinforced,
triple thickness and single stitched.
Seams: Not less than ½" (13 mm) wide, double turned and double stitched.
Curtain Tieback: At each termination.
PART 3 – EXECUTION
3.01 EXAMINATION
Examine
areas and conditions in which the cubicle track system will be
installed
1. Complete all finishing operations, including painting, before beginning installation of cubicle tracking system materials.
Verify
that surfaces and above ceiling supports are ready to receive work.
3.02 INSTALLATION
General:
Locate the cubicle track as indicated on the approved detail drawing
for the appropriate substrate
Installation of Cubicle Track System:
Install cubicle track, secure, rigid, and true to ceiling line.
Slide carriers onto the track.
Install end cap or stop device.
Secure or suspend track to ceiling system. Install with mechanical fasteners or T-Grid clips
Install
curtains on carriers ensuring smooth operation.
3.04 CLEANING
At
completion of the installation, remove any debris and clean surfaces
in accordance with C/S cleaning and maintenance instructions.
END OF SECTION
3
Werner Way, Lebanon, NJ 08833 US, 800-972-7217
895
Lakefront Promenade, Mississauga, ON L5E 2C2 Canada, 905-274-3611
Copyright
KOMPAKT LAMİNAT CUBICLE TEKNİK ŞARTNAMESİ 1 CUBICLE KOMPAKT LAMINAT
Tags: cubicle curtains, install cubicle, cubicle, curtains, section